Skip to main content

Pall Mall Dental Clinic

Composite bonding in Liverpool can often improve a chipped corner or a small gap between your teeth. Here at Pall Mall Dental, we shape tooth-coloured resin by hand directly onto your teeth, with little or no enamel removed in many cases.

 Your composite bonding is carried out by Dr Andrew Healy who holds a master’s degree with Distinction in Restorative and Aesthetic Dentistry from the University of Manchester. His approach is to improve the appearance of your teeth while preserving as much healthy tooth structure as possible. That means carefully shaping the resin to sit alongside your neighbouring teeth and checking how the finished bonding feels when you bite.

You can have a free consultation with us, where we’ll examine your teeth, gums and bite, explain what bonding can and can’t change for you, and discuss the cost of your individual treatment plan. You’ll know what we’d recommend for your teeth and why before deciding whether to go ahead.

Book your free composite bonding consultation at Pall Mall Dental

What is composite bonding?

Composite bonding is a cosmetic dental treatment that uses tooth coloured resin to repair or reshape part of a tooth. The resin is a soft, putty-like material, so we can add it in small amounts, shape it to the form we’ve planned with you, and then set it hard with a dental curing light. Once it’s set, we finish and polish it until the colour and shine closely match the teeth around it.

It’s closer to sculpting than painting, because we build the resin up and shape it as we go, rather than coating it over the surface in one go. And because it’s built straight onto your tooth instead of being made in a laboratory, we can see how it sits next to your other teeth while you’re in the chair and adjust it there and then.

You may also hear it called dental bonding or teeth bonding, and it’s the same treatment. Composite resin is also used for white fillings, but a filling usually repairs damage such as decay, whereas cosmetic composite bonding changes the shape or look of a healthy tooth.

How many times can composite bonding be replaced?

What can composite bonding help with?

Composite bonding can help with these common concerns, and we plan each one around your individual tooth.

  • Small chips, which we rebuild by adding resin to the missing corner and polishing it until it meets the edge that’s left.
  • Worn or uneven edges, where we bring back the length of a worn front edge or even it out so it sits level beside its neighbours.
  • Small gaps, with resin added to the side of one or both teeth next to the gap until it closes.
  • Narrow teeth, which we widen with resin so they sit in proportion with their neighbours. 
  • Small marked or stained areas, which resin can cover. If your teeth are generally darker than you’d like, we’d suggest whitening first, because whitening lightens natural teeth but not resin, so bonding placed beforehand would end up looking darker than the teeth around it. Once you’re happy with the shade, we match the resin to it.

Chipped tooth repair starts with checking the tooth itself, because a chip isn’t always only a cosmetic problem. A chip that’s rough to the tongue but comfortable is often only a surface problem, so bonding can rebuild it. If it’s sore when you bite or sensitive to hot and cold drinks, there may be more going on than a small surface chip. We’ll examine the tooth to find out whether it needs other treatment before bonding is considered. The NHS explains that treatment for a chipped tooth depends on the damage, from a filling or crown for some chips to root canal treatment, which treats the inside of the tooth, for a badly broken tooth.

Is composite bonding right for your teeth?

Composite bonding may suit you if your teeth and gums are healthy and the change you want is small enough to build up with resin, such as a chipped corner or a narrow gap.

That’s why your consultation covers more than the tooth you’re unhappy with. We check your bite, which is how your top and bottom teeth meet, because resin on an edge that touches the tooth opposite takes pressure every time you chew, and heavy contact there can wear or chip it. We’ll also ask whether you grind or clench your teeth, since that presses on the resin much harder than normal chewing, and we’d tell you if it puts the bonding at risk.

If the change you want would mean adding so much resin that the tooth would look noticeably larger than the teeth beside it, we’ll explain what other treatments might work better, so you can weigh up your options before deciding. The table below compares three ways of changing the shape of a tooth.

Option What changes When it may help
Composite edge bonding We add resin to rebuild a chipped, worn or short edge Small chips, worn edges or teeth that are slightly uneven in length
Teeth recontouring We gently reshape a very small amount of enamel Slightly pointed corners or small rough bumps along a tooth’s edge
Composite veneers We shape resin over more of the front surface of a tooth More extensive changes to a tooth’s shape or proportions

What happens during composite bonding treatment?

At Pall Mall Dental, composite bonding treatment generally follows five stages, from a conversation about what you’d like to change to a final check of your bite.

Talking through what you'd like to change.

We start by looking at your tooth with you and asking what you’d like to be different. “Making my teeth more even” could mean rebuilding one chipped corner or lengthening two worn edges, so we agree exactly which one you mean, and you know the plan before we start.

Choosing the shade and shape.

 The resin comes in different shades, so we choose one that matches the teeth around it. We also plan the height, width and curve of the finished tooth, because too much resin can make it look broad or bulky instead of natural.

Preparing the tooth.

We clean the tooth and prepare its surface with a conditioning gel, followed by a bonding adhesive, to help the resin attach securely. Many cases need little or no enamel removed, although that depends on the tooth. We’ll explain if any enamel needs adjusting before treatment starts.

Placing and shaping the resin

 We add the resin a little at a time, directly onto your tooth, and shape it against the teeth beside it as we go. That’s how we rebuild a chipped corner, close a small gap or bring a worn edge back to length.

Setting, polishing and checking your bite

A dental curing light sets the resin hard. Natural teeth have gentle curves and a fine surface texture that affect how light reflects from them, so we refine and polish the resin to help it blend in with the teeth beside it. Finally, we check how your teeth meet when you bite and adjust the new edge if it presses harder than your other teeth, so it feels natural when you eat.

How long does composite bonding last, and how do you look after it?

Composite bonding can last for years, but it isn’t permanent, and how long it lasts depends on where it sits on the tooth, how your teeth meet and how you look after it. Resin added to the side of a tooth tends to take less pressure than resin that rebuilds the biting edge of a front tooth, which is why we’d rather examine your teeth than quote a number that may not fit you.

Over time, bonding can pick up stains, lose some of its polish, wear or chip. In many cases we can polish or repair the affected area, whereas more extensive wear may need the resin replaced, and we’ll examine it and the tooth underneath before deciding which.

Looking after it is simple. Brushing twice a day with fluoride toothpaste and cleaning between your teeth daily helps keep plaque from building up along the edge where the resin meets your enamel. Resin is softer than enamel, so using your bonded front teeth to open packaging or bite pen tops can chip it.. Tea, coffee, red wine and tobacco can stain bonding over time, so cutting down on them can help the surface stay cleaner for longer.

Why choose Pall Mall Dental for composite bonding in Liverpool

We’re a family-run practice that has cared for patients in Liverpool for many years. We want you to feel comfortable asking questions and understanding the treatment we recommend, and that includes your composite bonding.

If you feel nervous about dental treatment, Dr Healy takes a particular interest in helping patients feel at ease, so you don’t have to keep your worries to yourself. We explain each stage of your treatment before we start. You can also get to know Dr Healy on our dental team page, where you’ll find his training and his approach to looking after patients.

And because composite bonding can need maintenance as it ages, your care doesn’t end with the finished bonding. During future dental appointments, we can examine the bonding, check for wear or damage and advise whether polishing, repair or another approach would be better for you.

Dentist in Liverpool

How much does composite bonding cost in Liverpool?

The cost of composite bonding depends on the plan we make for your own teeth, so we’ll give you a price for yours at your consultation, once we’ve seen what you’d like to change. Rebuilding one small chipped edge is a different job from reshaping several teeth, so the amount of resin, the time involved and whether a tooth needs any treatment first all change what a plan costs. The consultation is free, so you can find out what your own plan would cost before you spend anything.

At your appointment, we’ll talk you through the plan we recommend and what it would cost. You’ll leave knowing what could be done, what it would involve and why we recommend it, and you can think it over before deciding to go ahead. We also offer finance options, subject to status, to spread the cost, and we’ll explain how they work for your plan.

To find out what composite bonding could do for the tooth that’s bothering you, book your consultation at Pall Mall Dental and we’ll talk you through it.

Composite bonding FAQs

Composite bonding is generally comfortable and often doesn’t require an injection, as the work usually involves the outer enamel, which has no nerve endings. You might feel some light vibration while the tooth is prepared and some warmth from the curing light. If your tooth is sensitive or needs more preparation, we’ll discuss how to keep you comfortable.

Your natural tooth stays largely intact with bonding, because many cases need little or no enamel removed. Some teeth need minor preparation, and since enamel doesn’t grow back once removed, we’ll explain what we propose and why before treatment.

Bonding can close small gaps and make slightly uneven teeth look more balanced, but it can’t move teeth into a straighter position. We add resin to the sides of the teeth beside the gap, provided the finished teeth still look natural, because closing a wide space would leave them looking broad. If your teeth overlap or the gap is wide, we may recommend Invisalign at Pall Mall Dental instead, because it moves teeth into position.

Whitening lightens natural teeth but doesn’t change the shade of composite resin. If you’d like lighter teeth, whiten them first and we’ll match the resin to the new colour. If your existing bonding no longer matches, we’d usually replace the resin with a shade that does.

Small chips and worn areas can often be repaired or repolished without replacing all the bonding, depending on the state of the resin, the tooth underneath and why the damage happened. If a piece chips off, trying to smooth or fix it yourself can damage both the bonding and the tooth, so it’s better to keep the area clean and get in touch with us. If repeated chips come from your bite or from grinding, repairing the resin alone won’t fix the cause, so we’d look at that too.

Grinding doesn’t automatically rule bonding out, but it puts extra pressure on the resin, especially along biting edges, so we assess your bite and any signs of wear before recommending treatment. If it’s a concern for you, we may discuss a night guard (a custom mouthguard worn while you sleep), which takes much of that pressure instead of the bonding.

Composite bonding can often be finished in a single appointment, because we shape the resin directly onto your tooth instead of waiting for a laboratory to make it. How long that appointment lasts depends on how many teeth we’re treating and how much shaping each one needs. If a tooth needs other treatment first, such as a chipped tooth that’s sore to bite on, that comes before the bonding and adds to the time, and we’ll tell you how long your own treatment will take once we’ve examined your teeth.

No, not when it’s for cosmetic reasons. Composite bonding to improve how your teeth look is a private treatment, and Pall Mall Dental is a private practice. The NHS explains that it won’t provide cosmetic treatments that aren’t clinically necessary, such as teeth whitening, so bonding to change the shape or look of a healthy tooth falls on the private side.

Get in touch

    MENU